DEMCO Photoelelctric Smoke Detector D-213 with its new sensor design incorporates an internal pulsing LED and a photo-diode at an obtuse angle, is ideal for applications where slow-burning or smouldering fires are likely.
The D-213 has an advanced solid-state, low-voltage, surface-mount circuitry and are designed for 2-Wire installation using the D3X001 universal base. The detector head is installed into the base with a simple twist-lock action.
The 360-degree detector designed permits operation in open areas with air velocities form 0 to 300fpm.
A fine wire mesh extending between offsets ports in the exterior and interior walls screens insects from the chamber and obstructs light from passing directly to the interior part.
|Model||Heat Sensor Setting||Volltage DC (Max./Min.)||Standby Current (Max.)||Alarm Current (12/24V)||Surge Current (Max.)||Start-up Time (Max.)||Permissible Current (Max.)||Cycle Time||Base Model No.||Safety|
|D-213-2||10.8 ~ 33V||80µA||22/55mA||160µA||30 Sec.||80mA||1-3 Sec.||D32001||UL/CE|
|D-213-2L||–||10.8 ~ 33V||80µA||22/55mA||160µA||30 Sec.||80mA||1-3 Sec.||D34001||UL/CE|
|D-213-2H||135±5°F||10.8 ~ 33V||80µA||22/55mA||160µA||30 Sec.||80mA||1-3 Sec.||D32001||UL/CE|
|D-213-2HL||135±5°F||10.8 ~ 33V||80µA||22/55mA||160µA||30 Sec.||80mA||1-3 Sec.||D34001||UL/CE|
Remarks: L = Remote LED indicator output / H = Heat Detector
|Smoke Sensitivity||0.98-2.40% FT Obstruction (UL) ; 0.08-0.14 dB/m (EN)|
|Ceiling Spacing||50-foot rating for heat detector|
|Temperature Range||-10°C to 50°C|
|Humidity||0 to 95% RH, no condensation or icing|
|Dimension (H x D)||46 x 100mm with base|
|Weight||130g/set with base|
Feel free to ask any questions over the phone, or get in touch via our contact form below. Your message will be dispatched directly to our staff who will answer as soon as they can.