fbpx

45kg CO2 Cylinder (Model D-611)

45KG CO2 CYLINDER (MODEL D-611)

DEMCO 45Kg CO2 Fire Suppression agent is pressurized to 58.6 Bar at 21°C (850 psi at 70°F) and stored in 68L of seamless cylinder with each containing 45kg of liquefied CO2 agent. The element of CO2 is colourless, odourless, non-corrosive, non-conductive to electricity and work fast to vanish fire by decreasing the oxygen level that does not harm any property in the area.This system can be engineered to suit specific customer requirements. The indicators of audio and visual can be integrated into the control system that facilitates automatic trigger of fire doors, dampers and shutter.

DEMCO 45Kg CO2 Fire Suppression System is designed in accordance with National Fire Protection Association (NFPA 12), are available for use in total flooding (unmanned area) or local fire protection applications.

The cylinder shall be located in an environment protected from the weather and where the in a room temperature that does now exceed 54°C (130°F) nor fall below 0°C (32°F). The cylinders are tested to 250 bars and conform to ISO 9809, DOT-3AA, BS5045 PART 1 & NFPA 12.

  • Eco-Friendly and Cost Effective
  • Protection Effective
  • Non-damaging to property
  • Automatic Actuation
  • Remote Manual Actuation
  • Direct Manual Release
Model D-611
Water Capacity 68L
CO2 Gas Capacity 45 kg
Test Pressure 225 bar
Empty Weight 75 kg
Material Mn Steel
Height 1500mm
Manufacture to
BS EN ISO, 9809-1:2010, DOT-3AA
    QUICK CONTACT

    Feel free to ask any questions over the phone, or get in touch via our contact form below. Your message will be dispatched directly to our staff who will answer as soon as they can.

    1 Step 1
    keyboard_arrow_leftPrevious
    Nextkeyboard_arrow_right