fbpx

LPCB Certified Hose Reel Nozzles

LPCB CERTIFIED HOSE REEL NOZZLES

  • Manufactured to BS EN 671-1 & LPCB certified.
  • Available in both manual and automatic versions.
  • Easy and flexible installation with flexible direct-connect inlet hose without multiple joints thus reducing the risk of potential future leakages.
  • Supplied with swing arm bracket, a 19mm (3?4″) or 25mm (1″) hose outlet, 30m EN 694 compliant hose, duct pipe, nozzle and interlock.
  • Robust yet lightweight, and with the quick-install swing arm bracket allowing single person fitting.
  • Swinging arm allows the fexibility of left or right hand mounting.
  • Double 180° swivel joints to enable rotating and swinging in more than one plane thus suitable to be installed in steel cabinets and recess wall.
  • Maximum working pressure 12 bar (174psi).Test pressure 18 bar (261psi)
  • Unwind hose without the need for hose guide.
  • Automatic hose reel has integrated automatic stop valve which will open after 2 revolution of the reel.

Nozzles available in various types – D-801-1, D-803-1, D-804-1, D-811-1, D-811-3, D-818-1

Hose Reel System: 

  • Manufactured to BS EN 671-1 & LPCB certified.
  • Available in both manual and automatic versions.
  • Easy and flexible installation with flexible direct-connect inlet hose without multiple joints thus reducing the risk of potential future leakages.
  • Supplied with swing arm bracket, a 19mm (3?4″) or 25mm (1″) hose outlet, 30m EN 694 compliant hose, duct pipe, nozzle and interlock.
  • Robust yet lightweight, and with the quick-install swing arm bracket allowing single person fitting.
  • Swinging arm allows the fexibility of left or right hand mounting.
  • Double 180° swivel joints to enable rotating and swinging in more than one plane thus suitable to be installed in steel cabinets and recess wall.
  • Maximum working pressure 12 bar (174psi).Test pressure 18 bar (261psi)
  • Unwind hose without the need for hose guide.
  • Automatic hose reel has integrated automatic stop valve which will open after 2 revolution of the reel.
Model Setting Nozzle Diameter Inlet Size Flow Rate at 2 bar/6 bar (L/Min/Jet/Spray) Throw Range at 2 bar
D-801-1 Jet/Spray 6mm 19mm (3/4”) >24/41 >11.2
D-803-1 Jet/Spray 6mm 19mm (3/4”) >24/41 >11.2
D-804-1 Jet/Spray 6mm 19mm (3/4”) >24/41 >11.2
D-811-1 Jet/Spray 6mm 19mm (3/4”) >24/41 >11.2
D-811-3 Jet/Spray 6mm 19mm (3/4”) >24/41 >11.2
D-818-1 Jet/Spray 6mm 19mm (3/4”) >24/41 >11.2
    QUICK CONTACT

    Feel free to ask any questions over the phone, or get in touch via our contact form below. Your message will be dispatched directly to our staff who will answer as soon as they can.

    1 Step 1
    keyboard_arrow_leftPrevious
    Nextkeyboard_arrow_right